 |
| | | Product Listing for Power - SolarScroll down to view... | |
| | | PL20 Solar Panel Regulator | | | |  | | The PL series of charge controllers give you the freedom to operate your solar electric system the way you want to.
They offer complete control over the charge cycle, plus an unprecented amount of useful information about current and past performance.
PL regulators help to protect the system with a built in low battery disconnect switch. In addition, the versatile event controller can switch power on or off according to criteria set by the user. This allows the PL to do extra tasks such as switching a light on at night or keeping a water tank full by operating a pump when needed.
The user can select either Pulse Width Modulation or slow speed switching. Regulation can be done in both series and shunt modes. Other features include backup generator control and charging a second battery.
Informative
Display shows battery voltage, charge current, ampere hours in and out of battery, load being drawn from the battery and which part of the charge cycle the battery is in.
Easy to maintain
Information is available for the past 30 days - so even if the user doesn’t remember what happened, the regulator will.
Well Connected
With the optional PLI interface and PLcom software, the user can access the regulator from a computer. Data can be read or settings adjusted. This can be done remotely using a modem.
Versatile
It may be the only regulator you will ever need to stock. Its capacity to handle 12, 24 and 48V systems and allow complete control of the regulation cycle mean you can use it almost anywhere | | | | | Price: $335.00 (AUD) plus $6.00 delivery charge | | |
| | | Arrid 12 Amp Solar Panel Regulator | | | | | | | | | Price: $75.00 (AUD) plus $5.00 delivery charge | | |
| | | Super Solar Power 20A Regulator - MP3126 | | | |  | | With an massive 20 amp current handling, this switchmode solar panel generator is lightweight, easy to install and does not require a heatsink. It installs easily and features automatic operation, LED power indication and boasts an efficiency up to 99.2% @ 20 amps. Not only does the regulator switch the solar panel in and out depending on the battery voltage, the regulator will disconnect the solar panel after approx 20 minutes at night fall to prevent any losses into the panel overnight.
Features:
* Completely Automatic
* Battery or Solar Power LED indication
* Australian Made
Specifications
* Terminals: 6.4mm spade lug
* Suitable for 1 to 20 Amps
* Handles open circuit panel voltages up to 30 Volts
* Reverse Polarity Protected
* Efficiency: 97.0% @ 5 Amps, 98.5% @ 10 Amps, 99.2% @ 20 Amps
* Weight: 65 grams
* Measures: 66(L) x 51(W) x 34mm(H)
| | | | | Price: $79.95 (AUD) plus $1.00 delivery charge | | |
| |
